1.Representative location: The installation location of the Oven Thermocouple should be a location that accurately reflects the temperature distribution within the entire oven. This usually means mounting in a central location inside the oven, as this ensures that the temperature measurement is not affected by the oven walls or heating elements. Installed in this position, the temperature changes inside the oven can be more accurately monitored, allowing for more precise temperature control and cooking results.
2. Avoid obstruction: When installing the Oven Thermocouple, you need to ensure that it will not be blocked or blocked by objects such as food or baking sheets in the oven. If blocked, it may cause inaccurate temperature measurements because the air flow and temperature distribution inside the oven will be affected. Therefore, when selecting an installation location, avoid selecting a location that is blocked to ensure the accuracy of temperature measurement.
3. Avoid direct contact with heating elements: The installation location of the Oven Thermocouple should not be in direct contact with the heating elements inside the oven. Direct contact with the heating element may cause distortion of the temperature measurement, as the high temperature of the heating element may affect the accuracy of the temperature sensor. Therefore, you should ensure that the Oven Thermocouple is kept at a certain distance from the heating element to avoid this happening.
4. Fixed and stable: When installing the Oven Thermocouple, you need to ensure that it can be firmly fixed in position inside the oven and remain stable. This prevents the temperature sensor from moving or shaking during use, affecting the accuracy and stability of temperature measurements. Stable mounting of the Oven Thermocouple is usually achieved by mounting brackets or fixtures.
5. Avoid external influences: When choosing an installation location, you need to avoid choosing a location that is subject to external influences, such as being directly affected by the opening or closing of the oven door. Such a position may result in inaccurate temperature measurements, as the opening and closing of the oven door causes temperature changes. Therefore, a stable location that is not affected by external influences should be selected to install the Oven Thermocouple to ensure the accuracy and stability of temperature measurement.
SQ-5 Long and Short Pin Horizontal insertion without earth wire oven heater gas thermocouple replacement
Passes the ISO9001: 2008 Quality System Certification, which acquires the Qualified Supplier Qualification Certificate issued by the National Center for Gas Detection and RoHS verification report and enjoys a good reputation in both domestic and foreign markets