What are the components of a gas thermocouple?

A gas thermocouple consists of several key components that work together to measure and control the gas flow in a gas appliance. The main components of a gas thermocouple are:

1.Thermocouple Probe: The thermocouple probe is the sensing element of the thermocouple. It is typically a metal rod made of two different types of metals joined together at the tip. This junction is where the temperature difference is detected and converted into a voltage signal.

2.Junction: The junction is the point where the two dissimilar metals of the thermocouple probe are joined together. This junction is exposed to the heat generated by the pilot flame in a gas appliance.

3.Thermocouple Wire: The thermocouple wire connects the junction of the thermocouple probe to the control device of the gas appliance. It is a specialized wire made of two different types of metals that correspond to the metals used in the thermocouple probe. The thermocouple wire carries the voltage signal generated by the temperature difference at the junction.

4.Control Device: The control device, often referred to as a thermocouple or flame sensor, is the part of the gas appliance that receives the voltage signal from the thermocouple wire. It interprets the signal and determines whether the pilot flame is present or not. If the pilot flame is extinguished, the control device shuts off the gas supply to ensure safety.

5.Connector: The connector is the interface between the thermocouple wire and the control device. It allows for easy installation and connection of the thermocouple to the gas appliance.

These components work in conjunction to detect the presence or absence of the pilot flame in a gas appliance. When the pilot flame is lit, it generates heat that causes a temperature difference at the thermocouple junction. This temperature difference generates a small voltage signal, which is transmitted through the thermocouple wire to the control device. If the pilot flame goes out, the temperature difference disappears, resulting in a lack of voltage signal, and the control device shuts off the gas supply as a safety measure.

SQ-R Exported Timing Long and Short Lines oven thermocouple

Passes the ISO9001: 2008 Quality System Certification, which acquires the Qualified Supplier Qualification Certificate issued by the National Center for Gas Detection and RoHS verification report and enjoys a good reputation in both domestic and foreign markets.