How does an oven thermocouple work?

An oven thermocouple is a device that measures temperature by utilizing the principle of the Seebeck effect. The thermocouple consists of two different metal wires joined together at one end to form a junction. When this junction is exposed to heat, it generates a small voltage proportional to the temperature difference between the hot junction and the cold end.

Here's a breakdown of how an oven thermocouple works:

1.Junction Placement: The hot junction of the thermocouple is usually placed near the source of heat inside the oven. It can be positioned in the vicinity of the burner or heating element, where it will experience the highest temperature.

2.Temperature Difference: As the oven heats up, the hot junction of the thermocouple is exposed to the elevated temperature, while the other end remains relatively cooler.

3.Voltage Generation: The temperature difference between the two ends of the thermocouple leads to the generation of a small electrical voltage. This voltage is proportional to the temperature difference and follows the characteristics of the specific thermocouple materials used.

4.Measurement: The voltage generated by the thermocouple is measured by an electronic circuit or a temperature controller in the oven. The circuit converts the voltage into a temperature reading using a conversion table or an algorithm calibrated for the specific thermocouple type.

5.Control: The temperature controller uses the temperature reading from the thermocouple to regulate the oven's heat source, ensuring that the desired temperature is maintained. If the temperature deviates from the set point, the controller can activate or deactivate the heat source accordingly.

SQ-A4 Lighet Pin Thick head Mongline

Passes the ISO9001: 2008 Quality System Certification, which acquires the Qualified Supplier Qualification Certificate issued by the National Center for Gas Detection and RoHS verification report and enjoys a good reputation in both domestic and foreign markets.