How Do You Replace a Gas Stove Thermocouple?

Posted by Admin | 12 May

If your gas stove's pilot light won't stay lit, the thermocouple might be to blame. But how do you replace a gas stove thermocouple?

What is a gas stove thermocouple?

A gas stove thermocouple is a safety device that senses the pilot flame and allows gas to flow to the burner. If the pilot light goes out, the thermocouple shuts off the gas supply to prevent a gas leak.

How do you know if the thermocouple needs to be replaced?

If the pilot light won't stay lit, it's likely that the thermocouple needs to be replaced. You can test this by lighting the pilot light and holding down the control knob for 30 seconds. If the pilot light stays lit after you release the knob, the thermocouple is working. If not, it needs to be replaced.

How do you replace the thermocouple?

Turn off the gas supply: First, turn off the gas supply to the stove. This is usually done by turning the valve located behind the stove.

Remove the old thermocouple: Locate the thermocouple on the back of the stove, where it connects to the gas valve. Unscrew the nut that holds the thermocouple in place and gently remove it.

Install the new thermocouple: Insert the new thermocouple into the same position as the old one, making sure it is securely in place. Tighten the nut to hold it in place.

Reconnect the gas supply: Once the new thermocouple is installed, turn the gas supply back on and relight the pilot light.

Test the stove: Test the stove by turning on the burner and making sure it stays lit.

In conclusion, replacing a gas stove thermocouple is a relatively easy task that can be done in just a few steps. By following these simple instructions, you can ensure that your gas stove is working safely and efficiently. So if you're experiencing issues with your pilot light, consider replacing the thermocouple yourself to save time and money.